Procedure To Determine Strength Of Hardened Concrete By Rebound Hammer. bullet Before commencement of a test, the rebound hammer should be tested. A Schmidt hammer, also known as a Swiss hammer or a rebound hammer, is a device to The test hammer hits the concrete at a defined energy. Its rebound is by ASTM C ASTM D describes the procedure for testing of rock. The rebound hammer should be considered as a means of determining variations of Dirt or other loose material on the surface can be removed using a grinding stone prior to the test. A procedure for doing this is given in BS EN
|Published:||13 August 2017|
|PDF File Size:||12.73 Mb|
|ePub File Size:||25.78 Mb|
We have also discussed the use of rebound hammer test and its limitations. Here are the procedure of rebound hammer test and precaution while performing the test. We also discuss the rebound hammer graph which schmidt hammer test procedure the correlation between the compressive strength of concrete and rebound number.
What is Rebound Hammer? Rebound hammer is an instrument or a device, which is used to assess the relative compressive strength of concrete based on the hardness at or near its exposed surface.
Rebound Hammer Test procedure for Concrete Hardness
Rebound Hammer Test Procedure: In the procedure of rebound hammer test, the plunger of rebound hammer is schmidt hammer test procedure on the surface of concrete, so that a spring controlled mass with a constant energy is made to hit the concrete surface.
At the same time, a spring controlled mass rebounds back. This extent of rebound on a graduated scale is measured schmidt hammer test procedure the surface hardness. This measured value is designated as Rebound Number or a Rebound Index.
The importance of conducting RLA studies also arises from the regulations that are in place for a number of industrial equipments, like boilers, turbines etc.
Also, conducting RLA studies properly can safeguard human lives. Apply light pressure on the plunger - it will release it from the locked position and schmidt hammer test procedure it to extend to the ready position for the test. Press the plunger against the surface of the concrete, keeping the instrument perpendicular to the test surface.
Apply a gradual increase in pressure until the hammer impacts. Do not touch the button while depressing the plunger.
The rebound reading will be affected by the orientation of the hammer: Schmidt hammer measurements are on an arbitrary scale ranging from 10 to Schmidt hammers are available from manufacturers in several different energy ranges, including i Type L The test is also sensitive to other factors: Local variation in the sample.
To minimize this, it schmidt hammer test procedure recommended to take a selection of readings and take an average or median value.